Tascam DR-08 - Manual (Page 47)

TASCAM DR-08 47
NOTE
In some cases, when connected to the LINE output
of a device the volume cannot be adjusted and
might be too loud. In such cases, use the headphone
output jack or another output that can have its level
adjusted.
Reducing low-frequency noise when
recording
This unit has a low-cut filter that can be used to
reduce low frequencies during recording for a
clearer sound. Unnecessary noise from the sounds
of air-conditioning and wind during outdoor
recording, for example, can be reduced using the
low-cut filter. Set the filter to one of three levels
according to the recording conditions.
1 Press the
SETUP key to open the
SETUP
menu screen.
2 Use the + / – keys to select the
REC
menu item.
3 Press the ¯ (
Enter
) key to open the
REC
menu screen.
4 Use the + / – keys to select the
LOW CUT
item.
5 Press the ¯ (
Enter
) key to open the
LOW
CUT
setting screen.
4 – Recording