Tascam DR-08 - Manual (Page 81)

TASCAM DR-08 81
TIP
You can repeat playback of a single file by setting
the A point at its beginning and the B point at its
end. If A and B points have not been set, by default,
the A point is set as the start of the file and the B
point is set as the end of the file. As a result, an
entire file can be repeated by turning the repeat
function ON without setting A and B points in
advance.
Enhancing sound quality during
playback
This unit has a filter that can enhance voice
frequencies, reduce noise, and reduce high or low
frequencies during playback. Use this feature
according to the recorded material and playback
environment.
1 Press the
SETUP key to open the
SETUP
menu screen.
2 Use the + / – keys to select the
PLAY
item.
3 Press the ¯ (
Enter
) key to open the
PLAY
menu screen.
4 Use the + / – keys to select the
PLAY EQ
item.
5 Press the ¯ (
Enter
) key to open the
PLAY
EQ
setting screen.
6 – Playback