Tascam DR-08 - Manual (Page 56)

56 TASCAM DR-08
or the sound source itself has low volume, set
the switch to HIGH .
When the REC LEVEL switch is set to LOW
or HIGH , the unit automatically adjusts the
recording level for optimal recording, so you
cannot use the  / ¯ keys to manually
adjust the recording level.
Setting the recording level manually
1 Set the REC LEVEL switch on the right side
panel to MANUAL .
2 Press the REC key to put the unit into
recording standby. The recording indicator
blinks and the recording screen appears.
REC indicator
3 Use the  and ¯ keys to adjust the
input level. The input level is shown at the
bottom of the display.
NOTE
Press the • ª STOP key to end recording standby.
When in recording standby and during record- •
ing, even if the SPEAKER setting is set to ON, no
sound is output from the built-in speaker. If you
want to adjust the level or record while monitor-
ing the sounds, connect headphones to the unit’s
4 – Recording