Tascam DR-08 - Manual (Page 34)

34 TASCAM DR-08
CAUTION
When connected with a computer by USB, do not •
remove the microSD card from the unit.
microSD cards that are compliant with microSD/
•
microSDHC standards can be used.
A list of microSD cards that have been verified for
•
use with this unit can be found on the TASCAM
website (http://www.tascam.com/).
Preparing a microSD card for use
A microSD card must be formatted by this unit to
be used with the unit.
1 Confirm that the microSD card is inserted
and turn the power ON.
2 If a new card or a card that has been
formatted by a device other than this unit
has been inserted, the following pop-up
message appears.
3 Press the ¯ (
Exec.
) key to start
formatting the card.
CAUTION
Formatting erases all data on the card.
4 When formatting is complete, the Home
Screen opens.
CAUTION
When formatting, confirm that the remaining
battery charge is sufficient or use USB bus power.
You can also format the card at any time with this
unit. (See “Reformatting the microSD card” on
page 94.)
3 – Preparations