Tascam DR-08 - Manual (Page 71)

TASCAM DR-08 71
5 Press the ¯ (
Enter
) key to open the
JUMP
BACK
setting screen.
6 Use the + / – keys to set the jump back
interval to one of the following values: OFF,
1-10 seconds (in 1-second increments), 20
seconds or 30 seconds. (The default value is
3 seconds.)
7 Press the ¯ (
Enter
) key to confirm the
setting and show a pop-up with the setting
briefly, and then return to the
JUMP BACK
screen.
8 When you have finished making the setting,
press the HOME key to return to the Home
Screen.
Adjusting the playback volume
Press the + / – keys when stopped, when paused
or during playback to adjust the volume output
to headphones or an audio monitoring system
connected to the unit. The output level is shown at
the bottom of the display
6 – Playback