Tecfluid MT03L - Manual (Page 17)

17
Finally, in the last row, the selected input type and a number that is related to the value of
that input is shown. If when the level changes this number also changes, it means that the
converter receives signal from the level sensor.
7 PROGRAMMING PARAMETERS
By programming the converter, the visualization and the outputs of the instrument can be
configured.
Turn on the converter and press (Enter) to enter the main menu. The following screen
appears:
With the keys (Down / Left) and (Up), select Programming, and then validate with the key
(Enter).
If the converter has the password option enabled, a password must be entered. For more
details about the password, see section 5.1 on page 12.
Once in the programming menu, the first screen allows to choose between the different
options.
If 4 mA is selected, pressing the key (Enter) toggles between 4, 8, 12, 16 and 20 mA,
allowing to check the adjustment of the analog output.