Tecfluid MT03L - Manual (Page 5)

5
1 INTRODUCTION
MT03L converters are indicators for level measurement applications.
The electronic circuit is based on the most advanced technology in digital signal
processing, in order to obtain accurate and reliable measurements.
The equipment provides the following features (depending on the model):
 Graphic display with intuitive menus.
 Resistance input compatible with level transmitters series LE and transmitters
LTE from series LT, as well as with most of the level transmitters based in
variation of resistance.
 Analog input 4-20 mA.
 Level indication.
 Current output (4-20 mA) proportional to the level and user programmable.
 Relay outputs user programmable as level alarm..
2 RECEPTION
Converters of series MT03 are supplied conveniently packaged for transportation together
with their instruction manual for installation and operation.
All devices have been verified in our facilities.
2.1 Storage temperature
-20ºC ...... +60ºC
3 INSTALLATION
3.1 Location
The MT03L converter is housed in a box according to IEC 61554 standard. Its size is 96x96
mm and is intended to be mounted on a panel of a cabinet with a square hole of 90 x 90 mm
+0.5 mm / -0 mm. The cabinet should have a minimum depth of 90 mm behind the panel.
To place it into the cabinet, slide it through the front panel to the bottom as shown in the
following figure. Then screw the clamping arms until exert pressure on the panel.