Tech Source Raptor OpenWindows for Solaris - Manual (Page 10)

Raptor OpenWindows for Solaris Installation and Reference Manual
1-2
Raptor 2500T Supports either 2560x2048 (digital) or
2048x2048 resolution (digital), depending upon
the hardware configuration.
Raptor 2500T-DL Supports either 2560x2048 (digital) or
2048x2048 resolution (digital), depending upon
the hardware configuration. The appropriate
configuration supports the Tech-Source
2500FPS or 2100FPS respectively. This card
replaces the Raptor 2500T.
This manual contains two different software installation chapters
corresponding to the two different classes of graphics cards.
Please be sure to read the chapter corresponding to the graphics
card that you are installing. Read the label on the back of your
Raptor graphics card to determine the model of card that you have.
Alternatively, you can also look at Appendix C and identify your
card based on the drawings and descriptions.
All systems vary somewhat, therefore some knowledge of the
features of your system and a basic understanding of UNIX shell
commands are helpful during the software installation process.
From this point forward, Tech Source, Inc. will be referred to as
Tech Source or TSI.
The Raptor OpenWindows for Solaris software is provided on a CD-
ROM. It consists of:
•
Raptor device-drivers for Solaris
•
Raptor loadable module (DDX) for OpenWindows
•
MOX extension loadable module and libraries for OpenWindows
NOTE: OpenWindows is Sun Microsystems’ version of the X
Window System.
The software supports Solaris versions 2.5.1, 2.6, 7, 8 and 9.