Tech Source Raptor OpenWindows for Solaris - Manual (Page 5)

i
TABLE OF CONTENTS
INTRODUCTION
1-1
1.1 Overvi ew 1-1
1.2 Conventions 1-3
HARDWARE INSTALLATION
2-1
2.1 Hardware Configurations Supported 2-1
2.2 Installation Instructions 2-1
2.3 Raptor 2100/2500 installation 2-3
SOFTWARE INSTALLATION FOR I-CLASS CARDS
3-1
3.1 Overview 3-1
3.2 Requirements 3-1
3.3 Installing I-Class Card Driver Software 3-2
3.4 Changing Resolution and Bit-Depth 3-4
3.4.1 Resolution on Raptor 2000 and Raptor 2500 3-4
3.4.2 Resolution on Raptor 1000 3-4
3.4.3 Raptorconfig Utility 3-4
3.5 Setting Raptor as the Console (Optional) 3-6
3.5.1 Raptor as the Only Framebuffer 3-6
3.5.1.1 Sun Blade 100 and Sun Blade 150 3-6
3.5.1.2 Ultra 5 and Ultra 10 3-7
3.5.1.3 Sun Blade 1000, Sun Blade 2000, Ultra 80,
E250, and E450 3-8
3.5.2 Raptor with a Secondary Framebuffer 3-8
3.5.2.1 Other PCI Framebuffers 3-9
SOFTWARE INSTALLATION FOR T-CLASS CARDS
4-1
4.1 Overview 4-1
4.2 Requirements 4-1
4.3 Installing T-Class Card Driver Software 4-2
4.4 Changing Resolution and Bit Depth 4-4
4.4.1 Raptor 1100T 4-4
4.4.2 Raptor 2100T 4-4
4.4.3 Raptor 2500T and Raptor 2500T-DL 4-4