Venstar T1900 - Manual (Page 33)

Page 6.5
Select Yes to copy the
previous day’s program
to this day displayed.
If Yes is selected:
If No is selected:
The copy command becomes available after
programming the entire previous day.
If No is selected, as in previous steps, flashing prompts for input will appear for
the four time periods for the next day.
Press
MODE Press
MODE
Yes
No
Tu
Selecting Yes, then pressing mode will copy the
previous day’s program. If yes is selected again,
or each time, this routine will repeat.
6
After programming for all seven days is complete, press the PROGRAM button to
leave the Setup screens. If no buttons are pressed, the display will leave the setup
screens after 30 seconds. Press
PROGRAM