Venstar T1900 - Manual (Page 36)

Adjust the Programmable
Fan timer.
0 - 60 minutes.
0:00 = off
Adjust the Programmable
Fan start time. (step 4
appears only if step 3
is not 0:00)
Adjust the Programmable
Fan stop time. (step 5
appears only if step 3
is not 0:00)
Press
MODE
Press
MODE
FanOn
0:00
Setup
3
OFF
FanOn
9:00
Setup
Pm
5
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
PROGRAM
Press
This timer will start the fan at the top of each hour and the fan will run
for the number of minutes selected in step #3. Steps 4 & 5 restrict the
hours during which the programmable fan may operate; step #4 is the
start time and step #5 is the stop time. Selecting the same start and
stop times will cause the fan to operate 24 hours a day.
Page 7.3
Programming the Fan
PROGRAM
MODE
MODE
Press the MODE button. While holding
the MODE, press the PROGRAM
button to enter Setup screens.
Press the MODE button repeatedly
until this setup screen appears.
FanOn
Am
7:00
Setup
4
Stop
Start
7
Note: Press the MODE
button momentarily
to move through the
setup screens. Press
and hold the
MODE
button to move back-
wards through the
setup screens.