Venstar T1900 User Manual

Page 68

Advertising
background image

Page 14.6

Adjusting the Minutes of Run-Time
Before the Next Stage

(0 - 60 min.)

Adjust the amount of
time stage 2 must be
on before stage 3 turns
on.

0:02

3

Setup

29

(0 - 60 min.)

Adjust the amount of
time stage 1 must be
on before stage 2 turns
on.

0:02

2

Setup

28

For more detailed information, please see the explanation on page 14.4.

Press the PROGRAM button to leave the Setup screens. If no buttons are

pressed, the display will leave the setup screens after 30 seconds.

PROGRAM

Press

MODE

Press

PROGRAM

MODE

MODE

Press the MODE button. While holding
the MODE, press the PROGRAM
button to enter Setup screens.

Press the MODE button repeatedly
until this setup screen appears.

14

Note: Press the

MODE

button momentarily
to move through the
setup screens. Press
and hold the

MODE

button to move back-
wards through the
setup screens.

Advertising
This manual is related to the following products: