Snmp params, Sets – Verilink PRISM 3111 (34-00242) Product Manual User Manual

Page 47

Advertising
background image

Configuration

39

Unit IP Addr

Each device connected to the LAN is required to have a unique IP address
identifier. This field allows you to enter the unit IP address consisting of four
octets separated by periods. Each value has a range from 0 to 255 as shown in
Figure 3-16.

Figure 3-16 IP Address

Subnet Mask

This field allows you to enter the unit subnet mask consisting of octets separated
by periods. Each value has a range from 0 to 255 (Figure 3-16).

Router IP Addr

Accepts the IP address of a default router, if one is present. This field allows you
to enter the address consisting of four octets separated by periods. Each value has a
range from 0 to 255 (Figure 3-16).

Fltr 1 - 8 IP Addr

These eight fields accept the IP address of the source packet filter. If any of these
fields are set, access is allowed only by the specified IP addresses.

Reset LAN

For changes to take effect, the LAN interface must be reset or the unit must be
power cycled. Selecting this field brings up a confirmation screen which prompts
you to proceed with the reset. Selecting Yes will cause the reset to take place.

Selecting the Reset LAN command will disrupt data service.

SNMP Params

The SNMP interface is a feature of the PRISM 3111/3112 that provides seamless
integration and control of CSU /DSU functions within an existing SNMP managed
LAN /WAN environment. SNMP management stations are able to collect and
analyze data from all network devices which comply with the SNMP protocol and
to manage those devices. SNMP provides a standard means to monitor the status of
all compatible network elements. The PRISM 3111/3112 is embedded SNMP
agent supporting RFC 1213 (MIB-II) and RFC 1406 (DS1/E1) MIBs. Management
capabilities are expanded with the TXPORT MIB. Objects in these MIBs, and MIB
loading instructions are listed in Appendix A.

Sets

This field enables or disables the SET command responses for SNMP. Refer to
Appendix A, SNMP Agent, for detailed information on these responses.

TCP/IP Params

>

132.016.232.000

Advertising
This manual is related to the following products: