Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 103)

W e b S e r v e r I n t e r f a c e 3-75
Figure 3.73 Bridge Port Table
The Bridge Port Table screen lets you view the parameters described below
the Bridge Port Details screen. Clicking on a number in the “Index” column
of the Bridge Port Table will bring up the Bridge Port Details screen, which
displays, and, in some cases, lets you change, the parameters described below.
Figure 3.74 Bridge Port Details
Enable Enables or disables Bridging on this port.
Endpoint Endpoint name.
BPDU Option Shows if BPDU packet will be sent and received on this port.
Filter By Multicast
Addr Dest
Filters multicast messages received on this port, which reduces the load on the
WAN connection.
Filter By Broadcast
Addr Dest
Filters broadcast messages received on this port, which reduces the load on
the WAN connection.
Forward IP Frames
Only
Setting this option to “Yes” specifies that only IP frames will be forwarded
and all other frames will be filtered.
Priority Value of priority associated with this port. The lower the value, the higher the
priority.
Path Cost Value of efficiency of the path to the port. A higher path cost indicates a
lower link.