Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 98)

3-70 W A N s u i t e 6 4 5 0
DHCP Host Table Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Host Table screen
(Figure 3.65), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Host Details screen (Figure 3.66)
accessed by clicking on an “Index” number.
Figure 3.65 DHCP Hosts Screen
Host Name The name of the DHCP Server. Default is none.
The DHCP Hosts screen provides the following user-activated buttons:
NOTICE: You must Save and Restart for the new Server name to become active.
Figure 3.66 DHCP Host Details Screen
Static Entry Table Screen
The Static Entry Table screen (Figure 3.67) lists static IP Addresses
associated with MAC Addresses. This ensures that the same IP Address will
always be used for a given PC provided its MAC Address is known. These
parameters are configured on the Static Entry Details screen (Figure 3.68)
accessed by selecting a number from the “Entry Index” column.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Adds a new Server name.