Verilink WANsuite 6450 (34-00326) Product Manual - Manual (Page 135)

V T 1 0 0 I n t e r f a c e 4-27
Select the Unit Access Table prompt on the IP Details screen to view the Unit
Access Table (Figure 4.23), which specifies up to 10 different IP networks
that may access the unit’s parameters. If no IP networks are supplied, any
host may access the unit. Select any Index number on the table to view the
Unit Access Details (Figure 4.24) that correspond with that Index number.
Figure 4.23 Unit Access Table Screen
Figure 4.24 Unit Access Details Screen
Supervisory
The Supervisory screen (Figure 4.25) displays the current speed of the
Supervisory port interface along with other parameters as described below.
The Supervisory port supports only asynchronous character formats.