Wavetronix SmartSensor 105 (SS-105) - User Guide - Manual (Page 94)

APPENDIX • SMARTSENSOR 105 USER GUIDE 93
RTS (Orange)
CTS (Brown)
-485 (Blue)
+485 (White/Blue)
+DC (Red)
-DC (Black)
RD (Purple)
TD (Yellow)
RS-485 Drain
Power Drain
RS-232 Drain
GND (Gray)
Figure A.2 – 9-conductor Cable into the Click 200
Appendix B – Old Cable Definitions
The previously used SmartSensor cable is composed of six twisted pairs of wire. Each pair
is composed of a black and a red wire, accompanied by a drain wire and surrounded by a
shield. A numeric label (1 through 6) identifies each pair of black and red wires. Table B.1
details the pinout of the cable and the appropriate connection inside the cabinet for each
wire:
Cable Description
Red 1 +DC
Black 1 -DC
Drain of Pair 1 GND
Red 2 +DC
Black 2 -DC
Drain of Pair 2 GND
Red 3 +485
Black 3 -485
Drain of Pair 3 485 GND
Red 4 232 (TD) output from sensor
Black 4 232 (RD) input to sensor