Welltech WeIIBilling 6600 V.1.5 - Manual (Page 15)

Welltech Computer Co., Ltd.
WellBilling 6600 15
System Time
Step 1:
When relogon to the new IP address; the next is to
setup the system time zone. Click Control > System
Time
to setup the system. Enter current date and time.
Apply the change by clicking Apply button as figure
2.3-1.
Figure 2.3-1
Step 2:
If you would like to use SNTP to sync time with a SNTP
V4 Server, click Time Sync button to setup it as
figure2.3-2.
Figure 2.3-2
Step 3:
After successfully base setup; restart WellBilling 6600
to take effect as figure 2.3-3.