Welltech WeIIBilling 6600 V.1.5 - Manual (Page 20)

Welltech Computer Co., Ltd.
WellBilling 6600 20
☺Note: Please do not change it unless under Welltech’s
instruction.
Debug
Debug can be turn on or off based on each system module
and level to minimum the debug information.
Start Path: Configuration > Debug config
Figure 3.2-1
☺Note: Please only turn on the debug information for
debug purpose under Welltech FAE’s instruction
and turn off when complete. Or the system
performance will be greatly hit.
Event Config
Configure the system event.
Start Path: Configuration > Event Config