Welltech WeIIBilling 6600 V.1.5 - Manual (Page 50)

Welltech Computer Co., Ltd.
WellBilling 6600 50
Announcement Before Forward: Play Announcement before
call forward
Find Me: Locate subscriber based on different time segment
when the original (registered) contact cannot be reached.
- Find Me Hunting First: Hunting find me contact first.
- Hunting Subscriber: Applicable only for Find me
hunting checked will hunt subscriber registered
contact when find me can’t be reached.
Number Change: Change the original number to a new
number. Welltech IP Centrex 6850 is required for
announcement service.
Auto Call Forward: Auto Call forward or not after number
changed
Forward Subscriber Only: Forward to proxy subscriber only.
Call Pickup:
Group Pickup (Picked): Allowed to be picked-up within
group or not
Global Pickup (Picked): Allowed to be picked-up globally or
not
Screening Service:
Personal ANI Screening: Personal ANI screening can be
used to filter the caller based on caller ID. For all TEL are set
to allow (full match), only on-list ANI can get through. For all
TEL are set to disallow, only on-list ANI will be screened.
Otherwise, “disallow” has higher priority than “allow”.
Personal DNIS Screening: Personal DNIS screening can be
used to limit the called prefix. For all TEL are set to allow
(prefix match), only on-list DNIS can get through. For all TEL
are set to disallow, only on-list DNIS will be screened.
Otherwise, “disallow” has higher priority than “allow”
Do Not Disturb: Up-to 2 time segments can be set to reject
all incoming calls.
VAD Service
Coloring Ring Back: Coloring Ring Back Tone service
Announcement Service: Announcement Service