ACTi PCDK-0001 - Manual (Page 11)

www.acti.com
User Manual
11
4. Prepare the gooseneck with the pre- installed Ethernet cable “pigtail” inside. Connect the
Ethernet connector from inside the tube to the female connector of the “pigtail” of the
Gooseneck.
5. Insert the “pigtail” inside the tube, and then align the slot of the Gooseneck to the tab
inside the tube and install the Gooseneck to the tube.
6. Twist the Gooseneck to align the screw holes and attach the three (3) mounting screws
(included in the package).