Step 7: do the demo – ACTi PCDK-0001 User Manual
Page 20
User Manual
Step 7: Do the Demo
Now, you are ready to do the demonstration.
NOTE:
Before you proceed, make sure you have installed the
Camera Demo Tool
in your
notebook. Otherwise, download the tool from:
The
Camera Demo Tool
uses the ActiveX control components that are different from
the ACTi NVR v2.x versions, hence, make sure the notebook does not have any ACTi
NVR v2.x software installed.
1.
Open
Camera Demo Tool
.
2.
When running this tool for the first time, select a PC configuration that is more similar to
your notebook configuration.
Options are:
Preset Configuration for Intel Core i3 or lower
: The video settings, such as
Encoder Type, Resolution, Bit rate, and FPS, will be pre-selected.
Preset Configuration for Intel Core i5 or above
: The video settings, such as
Encoder Type, Resolution, Bit rate, and FPS, will be pre-selected.
Customization
: Select this option if your notebook does not fall under the above
two options or you would like to adjust certain properties for a special need. Note
that the pre-selected video streaming properties are based on higher computer
standard; hence you must tailor the settings to fit your system condition and
achieve good video quality for demo.