AIRLESSCO TS1500 - Manual (Page 14)

Maintenance
14 3A1183D
2. Unscrew intake valve from cylinder.
3. Disassemble intake valve. Clean and inspect.
O-ring (227) may require a pick for removal.
4. Tap piston rod out of cylinder with a hammer or flip
over and tap piston rod against a bench.
NOTE: Sleeve may come out of cylinder with piston rod.
5. Remove piston rod from sleeve, or remove sleeve
from cylinder.
6. Unscrew piston valve from piston rod. Clean and
inspect parts. The piston has a special thread lock-
ing/sealing patch. Do not remove the patch. The
patch allows for disassembly/assembly procedures
before it is necessary to apply Loctite
® to the
threads.
7. Remove packings and glands from piston rod.
7569a
227
7570f
7571a
7572a
7576a
ti3940b