Airlink RT210W - Manual (Page 18)

Wireless Broadband Router User Manual
8
Connecting the Wireless Broadband Router
Prior to connecting the hardware, make sure to power off your
Ethernet device, Cable/ADSL modem and Wireless Broadband
Router. Then follow the steps below to connect the related devices.
Step 1 Connecting wired device to the LAN port.
Attach one end of the Ethernet cable with RJ-45
connectors to your hub, switch or a PC’ s Ethernet port, and
the other end to the LAN port of the Wireless Broadband
Router.
Step 2 Connecting Cable/ADSL Modem to the WAN port.
Connect the Ethernet cable attaching to your Cable/ADSL
modem to the WAN port of your Wireless Broadband
Router.
Step 3 Connecting the power adapter.
Connect the single DC output connector of the power
adapter to the power jack on the back of the Wireless
Broadband Router. Then connect the supplied power cord
to the power adapter and the other end to an AC outlet.
Caution
Only use the adapter supplied with the Wireless
Broadband Router. Connecting another adapter can cause
permanent damage to the device.