Airlink RT210W User Manual
Page 57
Wireless Broadband Router User Manual
47
After upgrading, the new firmware version number is displayed in
Current Firmware version field.
u
Restore Factory Defaults
All settings set by the administrator will be erased. This option
restores all the settings back to factory defaults. To perform this
operation, click the Restore button and then wait for a few seconds.
You will return to the Administration page when the process is
complete. This feature is basically the same as resetting via the
reset button (see “Rear Panel and Connector”) on the device but it
allows you to remotely perform the reset task.
u
System
Reboot: Reboot the Wireless Broadband Router. This feature is
basically the same as resetting via the Load Default button (see
“Rear Panel and Connector”) on the device but it allows you to
remotely perform the reset task.
Figure 4-19 Administration