Airlink RT210W - Manual (Page 35)

Wireless Broadband Router User Manual
25
Username/Password: Enter the username and password provided
by the ISP used to log on to the Internet.
Connection Mode: Select your PPP connection from these options:
Keep Alive: This feature will keep your Internet connection
always alive. The Wireless Broadband Router sends echo
requests periodically to the ISP to prevent the connection from
being terminated by the ISP.
Connect on Demand: If enabled, the router will trigger a PPP
session for connection to the Internet if any client PC on your
WLAN/LAN sends out a request for Internet access. However,
the router automatically disconnects the PPP session after the
WAN connection has been idle for the amount of time you
specified in the Max Idle Time box (default, 300 seconds). If
your Internet account is billed based on the amount of time of
your Internet connection, you probably want to enable this
option and enter an idle time value best suitable for your
network.
MTU/MRU: Allows you to adjust the Maximum
Transmission/Receive Unit in bytes for the WAN interface. The
packets larger than the specified values will be fragmented before
being transmitted. It’ s suggested not to modify the MTU/MRU
settings unless instructed by the ISP.
After you finish the WAN settings, click Apply to enable the
changes.
Figure 4-6 WAN Configuration – PPPoE Client