Airlink RT210W - Manual (Page 50)

Wireless Broadband Router User Manual
40
4.8 Filters (Router Mode Only)
This page configures the LAN filters. The LAN machines blocked by
the filters will not be able to communicate through the WAN. The
administrator can block the LAN users from accessing some Internet
services such as FTP, SMTP (e-mail), HTTP or configure the filter
policy based on MAC address of the clients. Regardless of the
filtering policy, LAN users will be able to communicate with each
other and with the router itself.
u
General
Firewall: Select whether to Enable or Disable this function.
WAN Port: The default value is 80. This field defines the WAN port
of the Wireless Broadband Router.
When accessing the web page utility using a non-80 port, the
router’ s HTTP service (Web-based Configuration Utility) will be
accessible via the router’ s WAN port IP address following by a colon
and the non-80 port:
http://<WAN IP address>:<non-80 port>
For example, if 1234 is entered, a remote user can access and
configure the router at http://203.1.2.3:1234 where 1234 indicates
the WAN port number.
Syslog IP Address: If applicable, enter the IP address of the syslog
server. This feature informs the system administrator of all
accepted/denied attempts to access the WAN port.
Connection Logging:
•
Disabled. The log feature is disabled.
•
Denied. All denied requests is sent to log server.
•
Accepted. All accepted requestes is sent to the log server.
•
Both. All denied and accepted request is sent to the log
server.