Airlink RT210W - Manual (Page 27)

Wireless Broadband Router User Manual
17
3.4 Checking Connection with the Wireless
Broadband Router
You can use the PING command to verify whether or not the
Ethernet/Wireless client can communicate with the device.
1. Open the DOS command window.
•
For Windows 98/Me: Start > Run. Type command and
click OK.
•
For Windows 2000/XP: Start > Run. Type cmd and click
OK.
2. Type the ping command and enter the IP address of the
Wireless Broadband Router. The factory default value is:
192.168.1.1. If you have changed the IP of the device, then type
the new IP address of the Wireless Broadband Router.
For example: C:\ping 192.168.1.1