Airlink RT210W - Manual (Page 22)

Wireless Broadband Router User Manual
12
3.2 Setting up TCP/IP
Before proceeding, make sure your computer is equipped with
Ethernet network card or wireless adapter and has appropriate
network card driver and TCP/IP installed.
Note
1. If TCP/IP protocol is not installed on your PC, refer to Windows
documentations for installation instructions.
2. For initial configuration, it’ s recommended to connect only one PC
directly to the LAN port on the Wireless Broadband Router.
For Windows 98/ME
Step 1 Click on the Start menu, point to Settings and click on
Control Panel.
Step 2 Double-click the Network icon.
Step 3 In the Network window, highlight TCP/IP protocol for your
NIC or wireless adapter and click Properties.
Step 4 Choose one of the methods as required:
Option A: Using DHCP
On the IP Address tab, select Obtain an IP address
automatically and click OK.
Then an IP address will be automatically assigned to your
computer.