Amer Networks WLO220T CLI - Manual (Page 96)

. . . . .
C O M M A N D D E S C R I P T I O N S
vrouter
CLI Reference Guide 93
Queries
If a RIP-2 router receives a RIP-1 Request, it should respond with a RIP-1 Response. If the router
is configured to send only RIP-2 messages, it should not respond to a RIP-1 Request.
Get/Show Commands
set interface name protocol rip
passive-mode Specifies that the interface to receive but not transmit RIP
packets. Default: none
get protocol rip advertise-def-route Displays default route (0.0.0.0/0)
get protocol rip default-metric Displays default metric.