Amped Wireless TAP-R2 - High Power Touch Screen AC750 Wi-Fi Router - Manual (Page 124)

TAP-R2 USER’S GUIDE
123
Troubleshooting: Local Network Issues
My computer is getting an IP address of 169.254.x.x and Windows says “Limited or no Connectivity”.
a) Make sure the Router is powered on.
b) Check that your computer’s network adapter is enabled and is set to “Obtain IP Address
Automatically”.
c) Release and Renew your IP Address on your computer. To do this on a Windows computer:
- Click Start > Run and type CMD .
- When the command prompt appears, type ipconfig /release and press enter .
- Type ipconfig /renew and press enter .
- Check that your computer’s network adapter has an IP address of 192.168.3.x
d) Restart your computer and check again.
e) Restart the Router and check again.
f) Make sure DHCP is enabled in the Router’s Web Menu (Go to More Settings > IP Settings > Local Area
Network (LAN) > DHCP Settings.
g) Check that your Firewall or Anti-Virus software is not preventing you from accessing shared devices on
you network.