ARAG Bravo 300s series computers crop spraying - Direct connection - INSTALLATION User Manual
Page 5
5
3
iNtENDED USE
Bravo 300S is a computer which, when connected to a valve or suitable control unit, makes it
possible to control all phases of treatment in agricultural applications directly from the cabin of the
farming machine it is installed in.
This device is designed to work on agricultural machinery for crop spraying applica-
tions.
The machine is designed and built in compliance with EN ISO 14982 standard
(Electromagnetic compatibility - Forestry and farming machines), harmonized with
2004/108/EC Directive.
4
pREcAUtiONS
• Do not aim water jets at the equipment.
• Do not use solvents or fuel to clean the case outer surface.
• Do not clean equipment with direct water jets.
• Comply with the specified power voltage (12 Vdc).
• In case of voltaic arc welding, remove connectors from Bravo and disconnect the
power cables.
• Only use ARAG genuine spare parts and accessories.
5
pAckAgE cONtENt
The table below indicates the components that you will find in the Bravo 300S computer package:
Fig. 1
Legend:
1 Bravo 300S
2 Instruction manual
3 Power cable
4 SD memory card
5 Fixing kit
6 Power supply connector
7 Complete harness to connect valves
and sensors
8 Inductive speed sensor
9 Section valve connector seals