ARAG Bravo 300s series computers crop spraying - Direct connection - INSTALLATION User Manual
Page 8
8
6.4
Control unit position
The control unit must be fixed with the special brackets supplied and fitted to the unit, positioning it
as shown in the manual provided with the assembly.
MAKE SURE TO FOLLOW ALL THE SAFETY INSTRUCTIONS GIVEN IN THE CON-
TROL UNIT’S MANUAL.
7
cOMpUtER cONNEctiON tO thE FARMiNg MAchiNE
7.1
General precautions for a correct harness position
• Securing the cables:
- secure the harness so that it does not interfere with moving parts;
- route the harnesses so that they can not be damaged or broken by machine movements or twisting.
• Routing the cables to protect against water infiltrations:
- the cable branches must ALWAYS be face downwards (Fig. 6a and 6b).
• Fitting the cables to the connection points:
- do not force the connectors by pushing too hard or bending them: the contacts may be damaged
and computer operation may be compromised.
Use ONLY the cables and accessories indicated in the catalogue, having technical fe-
atures suitable for the use to be made of them.
Fig. 6a
Fig. 6b