ARM Electronics DVRHD - Manual (Page 33)

DVR User’s Manual
32
3.7.5.3 Alert IP
The Alert IP must match the IP address of the computer installed the CMS.
3.7.5.4 Alert Port
The ports for DVR and the CMS Alert MUST be the same.
3.7.5.5 Alert Interval
Users can define the time interval (1 to 255 seconds) between each alive
message.
3.7.6 Event Full Screen
This function allows the DVR to display the alarm channel in full screen size
when an alarm is triggered. Select <None> to disable this function; select
<Main> to display the alarm channel on Main Monitor when an alarm is
triggered; select <Call> to display the alarm channel on Call Monitor; and
select <Both> to display the alarm channel on both Main Monitor and Call
Monitor.
3.7.7 Event Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds.
3.7.8 Per Channel Config
This menu is used to configure the <Video Loss Detect>, <Motion Detect>,
<Alarm In> and <Alarm Out> settings for each channel. The menu is
displayed as below.
Per Channel Config
Channel Select
Video Loss Detect
Motion Detect
Motion Detect Indicator
Detection Config
Alarm In
Alarm Out CH1
OFF
OFF
ON
OFF
ON