ARM Electronics DVRHD - Manual (Page 62)

DVR User’s Manual
61
5.3.7 Health Status of HDD
This function verifies HDD status of the DVR. The information items shown in
the chart are described as below:
Device Name
This item shows the model name of the HDD.
Int./Ext.
This item indicates whether the HDD is an internal or external device.
Total Size
This item indicates the total size of the HDD.
State
This item indicates whether the HDD is active or non-active.
Temperature
This item indicates the current temperature of the HDD in Celsius degree.
5.3.8 Normal and Dual Streaming
For different networks with different bandwidths, two streaming options are
provided – normal and dual streaming. The preset is normal streaming.
Users who are using high-speed networks, normal streaming will be a
recommended choice. Depending on the HDD capacity and network usage,
set the remote monitoring software to occupy high or low bandwidths.
For networks with limited bandwidth, dual streaming will be a better choice. It
enables coexistence of high quality streaming at local DVR site and lower
quality streaming but faster transmission for the remote monitoring site. To
select dual streaming, click on the bandwidth icon and the icon will change
color. Then users can furthermore choose different bit rates to adjust for the
best displaying quality.
NOTE: Dual streaming will only be available when the total PPS is set
to one-half of the max PPS, for example, set 30PPS for D1 recording.
The reserved half of the max PPS will be handling the low rate
streaming for transmission to the remote monitoring site.