ARM Electronics ENDVR9A - Manual (Page 49)

Please follow the next steps carefully in order to ensure correct installation.
The compartment located on the front panel of the DMR is the removable Cartridge Casing in which you insert the HDD. The
various parts of the Cartridge Casing are labeled for your reference.
2.
45
Remove the Cartridge Casing from the DMR
Remove the Cover from the Cartridge Casing
à Unclip the release latch with the word “OPEN” printed beside it by gently pushing on the latch.
à Slide the cover off the Cartridge Casing.
1.
Cartridge Casing
APPENDIX #1 – INSTALLING THE HDD
Keyhole
LED indicator lights
Handle
3. Connect the HDD into the Cartridge Casing
Please take the Hard Disk Drive and Connect the two cables from the back of the Cartridge Casing to the HDD.