Eneo EDC-3371 - Manual (Page 19)

9
4.10 Area Title
Enter a specific name on programmed angle between START and END. For the screen below, when the camera points at an angle between 4.3° (PAN),
30.7° (TILT) to 359.5° (PAN), 45.4° (TILT), ABC will be displayed on the screen.
. Select the” NUMBER” and set the desired number by pushing the Joystick left or right.
. To edit the title, follow the procedure of the auto scan above to edit titles.
3. Select „START ANGLE”. Hold down the
CTRL key while selecting the start position using the Joystick. Current panning position will be displayed.
Release CTRL key to complete the selection of the start position. Or Press IRIS Open then the „CTRL” displays. Move the desired position.
Press IRIS Close then the „CTRL” disappears. To adjust at the 0. degree interval, twist the Joystick at the pan field and the tilt field.
4. Select „END ANGLE.” Hold down the CTRL key while moving the Joystick to select the end position. Release the CTRL key to complete the selection of
the end position. Or Press IRIS Open then the „CTRL” displays. Move the desired position. Press IRIS Close then the „CTRL” disappears.
To adjust at the 0. degree interval, twist the Joystick at the pan field and the tilt field.
5. Select „SWAP”. Set to ON, to exchange the start angle and the end angle.
6. Select Save and Exit and push the
Joystick to the right or press IRIS Open. Press ESC or IRIS Close to exit the program without saving.
4.11 Privacy Zone
Hide up to 8 unwanted scenes in a camera.
PRIVACY ZONE SETUP
(CTRL KEY)
NO TITLE METHOD
0 ABC ON BLOCK
0 DEF ON V.OFF
03 OFF – – – –
04 OFF – – – –
05 OFF – – – –
06 OFF – – – –
07 OFF – – – –
08 OFF – – – –
SAVE AND EXIT (ESC TO CANCEL)
. Place the cursor at the title field.
. Holding down the
CTRL key displays the privacy area menu while selecting the position using the Joystick. Current position will be displayed.
Release CTRL key to complete the selection of the position.
Or Press IRIS OPEN then the privacy area menu displays. Move the desired position. Press IRIS CLOSE then the „CTRL” disappears and returns to the
previous menu.
AREA TITLE SETUP
NUMBER : 0
TITLE : ABC
START ANGLE : 4.3 30.7
END ANGLE : 359.5 45.4
SWAP : OFF
SAVE AND EXIT (ESC TO CANCEL)
NUMBER: 0 - 6
TITLE: up to  characters
SWAP: Swap the start point for the end point.