Eneo EDC-3371 - Manual (Page 29)

9
SYSTEM INFORMATION
CAMERA TYPE: xxxx
H/W VERSION: Vx.xx
ROM VERSION: Vx.xx
PROTOCOL: xxxx
BAUDRATE: 9600
EXIT (ESC TO EXIT)
• SYSTEM INFORMATION
The system information provides essential information about the dome camera if service is required. When you view this screen, you can determine the
camera type, ROM version.
The information on this screen cannot be modified.
4.14 Function Run
This Function Run menu allows you to execute the function when you use a keyboard or a DVR without the function keys (PRESET, PATTERN, TOUR and SCAN).
FUNCTION RUN SETUP
(CTRL KEY)
PRESET: – – –
PATTERN: – – –
TOUR: – – –
SCAN: – – –
HOME
AUTO PAN:
RELAY OUT: – – –
EXIT (ESC TO EXIT)
. Select the desired Function by pushing Joystick Up or Down.
. Select the number by twist the Joystick in PRESET, PATTERN, TOUR and SCAN.
3. Press CTRL or IRIS OPEN to execute.
NOTE: To execute the function, you should store the function (PRESET, PATTERN, TOUR and SCAN) first.
• HOME
Select the HOME menu and press CTRL key. Then dome camera goes to the default position to which the dome camera returns after an assigned period
of inactivity passes.
The default position may be a Preset, Tour, Pattern or no action.
• AUTO PAN
You can execute the endless auto pan which is to turn one direction continuously by selectimg the Auto Pan.