Ensemble Designs BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator - Manual (Page 21)

www.ensembledesigns.com BrightEye 57
TM BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Guide
Page 21
Module Configuration and Control
Control and operation of the BrightEye 57 is performed from the front panel and with the BrightEye
Control application (version 2.1.2 or later). Some control settings and parameter choices are available
only with BrightEye PC or Mac. These parameters cannot be monitored from the front panel.
Front Panel Controls and Indicators
The front panel shown in the figure below provides status indicators and control over video and audio
output.
Status Indicators
The following status indicators are provided on the front panel:
Pattern
The currently selected video pattern will illuminate green. Choices include:
Black (choices include Black, Flat Field 20, Flat Field 80), Bars (choices include 75% Full Bars,
100% Full Bars, 75% Split Bars, 100% Split Bars, SMPTE Bars, SMPTE 219 Bars), Safe (Safe Title),
Crosshatch, Preset 1, Preset 2, Preset 3, or User Card.
“Preset” refers to menu selections available in the Pattern menu in the BrightEye Control application.
Each of the Preset fields (Preset 1, Preset 2, Preset 3) have fifteen pattern types available to select in the
Pattern menu.
“Card” refers to a test pattern stored on a Secure Digital Memory Card. If the Card green light is
illuminated, it indicates that you have inserted an SD Memory Card into the card slot in the front of the
BrightEye 57 and selected “User Card” from the Pattern Sel field in the Pattern menu.
Audio
Illuminates green when the option is selected to embed Audio.
Slate
Illuminates green when the signal identification slate is enabled. To change the Slate Text ID, use the
ID, ID Mode, and Slate Text fields in the Pattern menu in the BrightEye Control application.