Ensemble Designs BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator - Manual (Page 24)

www.ensembledesigns.com BrightEye 57
TM BrightEye 57 3G/HD/SD/Analog Test Signal and Sync Pulse Generator User Guide
Page 24
Pattern Menu
To select the video test pattern, select the Pattern menu shown below. Use the drop-down menus to
set the parameters for the Pattern Sel, Preset 1, Preset 2, and Preset 3 fields. Or select a test pattern
stored on a Secure Digital Memory Card. Enable or disable the Y, Cr and Cb Channels. Determine the
Slate ID parameters.
• Pattern Sel – select the video test pattern for output from the drop-down menu. Choices are:
Black, Flat Field 20, Flat Field 80, 75% Full Bars, 100% Full Bars, 75% Split Bars, 100% Split Bars,
SMPTE Bars, SMPTE 219 Bars, Safe Title, Crosshatch, Preset 1, Preset 2, Preset 3, User Card.
• Preset 1, Preset 2, Preset 3 – select the video test pattern for the Preset fields. To use one
of the Preset test patterns, select from each Preset drop-down menu: Flat Field 50, White,
Red Field Bars, Video Ramp, Data Ramp, Shallow Ramp, 5 Step, Sweep, MultiBurst, Full Field
Window, Component Window, Digital Blanking, Cosite, Interlace, Pathological.
• User Ptn Sel – use the up and down arrows on this control to select a custom video test
pattern stored on the Secure Digital Memory Card. Each number corresponds to one of the
video test patterns on the card.
Please see the BrightEye Support page for a link to download the Test Pattern Generator
software application. See also the Pattern Generator User Guide for details on preparing test
patterns for use with the BrightEye 57.