H3C Technologies H3C S12500 Series Switches - Manual (Page 26)

19
Figure 13 Policy application range
c. Click to bring up the page for adding an IP address group.
Figure 14 Adding IP address group 1
d. Enter the name 192.168.1.1/32, select the protocol IPv4, enter the IPv4 address
192.168.1.1/32, and click <<Add to add the address to the IP address box.
e. Click Apply.
f. In the policy application range page, click to bring up the advanced configuration page.
Figure 15 Advanced configuration
g. Select 10 from the Segment list, select the Internal Zone option, and select the IP address
192.168.1.1/32 from the Internal Zone IP Addresses area.
h. Click Apply.
i. After finishing the above configuration, click OK on the page shown in Figure 12 .