Grass Valley 8921DAC - Manual (Page 20)

20 8921DAC Instruction Manual
Configuration
• BANK 2 (second Function) yellow LED – when off, indicates that the
rotary switch is addressing the first bank of functions. When on, indi-
cates that the rotary switch is addressing the second bank of functions.
• CONTROL (paddle) switch – actuates or selects the desired setting for
the selected function when the switch is held momentarily in either the
up or down position.
• CONF (configuring) yellow LED – when on, indicates the module is
programming hardware.
8921DAC Module Onboard Configuration Settings
To make a configuration setting:
1. Rotate the CONTROL rotary switch to Bank 1 (BANK 2 LED off) or
Bank 2 (BANK 2 LED on) and to the desired function within that bank
according to
Table 4 on page 21 .
2. Move the paddle switch to the up or down position and hold
momentarily to set the desired function (refer to
Table 4 on page 21 ).
Note Holding the paddle switch in the up or down position for more than a half
second will automatically accelerate through the value range for parameters
with 256 or more values. The full range can be accessed in about 10 seconds.