The module – Grass Valley 8921DAC User Manual
Page 27
Advertising
8921DAC Instruction Manual
27
Configuration
I/O Config Web Page
) shows the rear input and output con-
nections to the module. Audio input and output status is reported by the
color-coding of the corresponding blocks. Refer to
for a complete explanation of status reporting.
Reporting of status for each input and output can be enabled or disabled
by checking or unchecking he corresponding
Enabled
checkbox. Disabling
reporting will turn the corresponding box gray as shown in the example for
Audio Out 3 in
.
Note
Enabling an AES input is effective for both the 3-pin connector and the BNC.
Figure 10. 8921DAC I/O Config Web Page
Use
this
link
Advertising