Grass Valley 8921DAC - Manual (Page 32)

32 8921DAC Instruction Manual
Configuration
Audio Proc Web Page
The Audio Proc web page ( Figure 14 ) reports the following for each output
channel:
• Presence of processed audio output signal (True = > – 40 dBFS)
• Clip status of processed audio output signal (True = > – 0.5 dBFS)
Use the Audio Proc page to make the following adjustments:
• Gain – adjust the output gain in dB for each channel with the corre-
sponding
Gain controls.
Gains can also be adjusted in pairs (Channel 1 and 2, Channel 3 and 4)
by selecting the corresponding
Locked checkbox in the Gain Locking
area and adjusting either Gain control in the pair. Gain offsets between
channels are preserved for each channel (except when the limits are
reached).
• Processing – set the output processing mode for Analog Audio Out
Channel 1/2 (rear connectors J1 and J2) and Analog Audio Out Channel
3/4 (rear connectors J3 and J4) from the corresponding Processing pull-
down. Refer to
Output Processing Modes on page 15 for an overview of
each output processing mode.
Figure 14. 8921DAC Audio Proc Web Page
Use
this
link