Grass Valley 8960DEC - Manual (Page 22)

22 8960DEC—Instruction Manual
Configuration
VBI Line Processing
VBI Processing Notch Decode
Delete,
Notch Decode or
Video to Luma
VBI/Data Line
Processing/
VBI Processing
1/C vbiproc
Select Notch Decode or Video to
Luma filtering or Delete to
remove content (lines 10-20
NTSC, lines 6-25 PAL-B).
Data Line Processing (Active Picture lines available for use as data lines determined by SAV setting)
Data Line
Processing
Notch Decode
Delete or
Notch Decode
VBI/Data Line
Processing/
Data Line Processing
2/C dataproc
Select Notch Decode to apply
U/V filtering or Delete to remove
content (blank).
Setup on Data Lines
(525 only)
No Setup
Setup or
No Setup
VBI/Data Line
Processing/
Data Line Processing
2/D datsetup
Select Setup if Setup is present
on data lines or No Setup for
no setup present.
Video Timing and Freeze Controls (available only when Frame Sync Submodule option is installed)
Lock Source Reference
Video Input or
Reference
Timing/
Lock Source
2/0 Lock To Choose a lock source.
Horizontal Phase 0
0–63418 ns (525)
0–63862 ns (625)
(step size 37 ns)
Timing/
Horizontal Delay
2/2 H Phase
Adjust horizontal delay in clock
increments.
Vertical Phase 0
0–524 lines (525)
0–624 lines (625)
(step size 1 line)
Timing/
Vertical Delay
2/3 V Phase
Adjust vertical delay in line
increments.
Freeze
Recognition
Manual
Manual or
Auto
Timing/
Freeze Recognition
2/4 FrzRec
Select Manual or Auto. Auto
stores the last field in the frame
synchronizer to use if the input
video is lost or corrupted.
Manual Freeze Off
On or
Off
Timing/
Freeze Button
2/5 N/A
Perform a manual freeze
according to selected freeze
parameters.
Freeze Mode Frame
Field or
Frame
Timing/
Freeze Mode
2/6 FrzMode
Select freeze mode as Frame or
Field.
Freeze Field Field 1
Field 1 or
Field 2
Timing/
Freeze Field
2/7 FrzField
Select freeze field as Field 1 or
Field 2.
Freeze Signal Last Field
Black or
Last Field
Timing/
Freeze Signal
2/8 FrzSig
Select the freeze output signal
if Auto or Manual Freeze is
activated.
1 Grass Valley no longer supports PAL-M in any of its modular products. Although this setting may work in certain applications, Grass Valley will not warrant that it works
or provide support if problems are encountered using this product with PAL-M signals. This product has not been modified to eliminate support for PAL-M. If this product
has been used with PAL-M in the past without problems, there shouldn’t be any issues using it for the same application. However, it is not recommended that customers
use it in any new PAL-M applications.
Table 4. Summary of 8960DEC Configuration Functions By Function
Function
Default
Value
Range/Choices
Web Page
Function Name
Rotary
Switch
Bank/Setting
Newton
Control
Panel
Notes/Conditions