Grass Valley 8960DEC - Manual (Page 29)

8960DEC—Instruction Manual 29
Configuration
8960DEC Links and Web Pages
The 8900 web interface GUI provides the following links and web pages for
the 8960DEC module (
Figure 10 ):
• Status – reports input and reference signal status and module informa-
tion (
page 30 ),
• Standard Selection – provides controls for setting module line standard
and setting output video levels (
page 31 ),
• Levels – provides access to controls for adjusting luma, chroma, hue,
and black levels (
page 33 ),
• Timing – provides lock source and fine phase adjustments and hori-
zontal and vertical timing adjustments when the 8900FSS is installed
(
page 34 ),
• Video Processing – provides controls for enabling and disabling video
functions on the encoded output (
page 36 ),
• VBI/Data Line Processing – provides controls for setting start of active
picture and VBI and data line configuration (
page 37 ),
• Recall Factory Defaults – use this web page to recall factory defaults for
the module (
page 38 ), and
• Slot Config – provides a Locate Module function, Slot Identification
fields, Slot Memory controls, and links to the Frame Alarm and SNMP
Trap enables on the 8900NET module web pages (
page 39 ).
Figure 10. 8960DEC Web Page Links
On all web pages, click on Apply to activate settings in each selection then
refresh the web page at the top of the page with the Refresh button (both
shown at left).
Refer to the Configuration Summary in Table 4 on page 21 for a summary
of what video lines are affected by each control, all parameters, step sizes,
and default values.