Grass Valley Aurora Edit LD v.6.5 Installation - Manual (Page 69)

November 25, 2008 Aurora Edit Installation Guide
55
Testing the Installation
Testing the Installation
This section describes two quick tests to determine if IIS and the conform service are
running properly.
Testing IIS installation
To test IIS, do the following on the conform server:
• Using Internet Explorer, go to
http://<Conform_Server_name>
If the page displayed does not indicate that the web service is running, recheck the IIS
installation procedure.
Testing Conform Service Installation
On the Conform Server, do the following:
1. Using Internet Explorer, go to
http://<Conform_Server_name>/xre/Services.asmx
.
The Conform Server Web Services page appears.
2. Click
QueryBoxInfo
.
3. In the
Test
section, click
Invoke
.
An XML page displays information such as the software version, job queue
information, and service uptime.
From an Aurora Edit client, do the following:
1. Open the Conform Manager tool.
The Conform Server and job queue should be visible.
2. Submit a conform Job via the Send command and verify that it completes.
If errors occur, use the Thomson Event Viewer (to inspect the conform server log:
1. From the Windows task bar, select
Start | Programs | Thomson | Thomson Event
Viewer
.
2. Verify that, under the
View
menu, that
Aurora Application
and
Conform Service
are
both checked; these are the two services you should monitor.