Grass Valley FXE-1501 - Manual (Page 11)

GUIDE TO INSTALLATION AND OPERATION
FXE-1501 | 7
3.4 Remote control using iControl
The operation of the FXE-1501 may be controlled using Miranda’s iControl system.
• This manual describes the control panels associated with the FXE-1501 and their use.
• Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the FXE-1501 icon to open the control panel.
3.4.1 The iControl graphic interface window
The basic window structure for the FXE-1501 is shown in figure 3.2. The window identification line gives the card type
and the slot number where the card is installed in its Densité frame.
There are three main sections in the window itself, identified in figure 3.2:
Section 1. The top section displays three icons on the left. These icons report the status of the two interface ports of
the FXE-1501, as well as the card control status.
Icon # 1 2 3
Move the mouse over an icon and a status message appears below the icon providing additional information.
If there is an error, the error status message appears in the message area without mouse-over.
• If there are multiple errors, the error messages cycle so all can be seen
• The icon whose status or error message is shown is highlighted with a mauve background
1
2
3
Figure 3-2 FXE-1501 iControl graphic interface window