Grass Valley FXE-1501 - Manual (Page 21)

GUIDE TO INSTALLATION AND OPERATION
FXE-1501 | 17
ANNEX 1 – FXE 1501 User Interface (local menu structure)
STATUS NO REAR, FXE-1501-SRP-F
NO FIBER MODULE, BRAND and REFERENCE
NO UTP LINK, UTP [10/100/1000] [FULL/HALF]
NO FIBER LINK, FIBER LINK OK
UTP NEGOTIATION [AUTO , MANUAL]
UTP SPEED * [1000, 100, 10]
UTP DUPLEX ** [FULL, HALF]
JUMBO PKT SIZE [1.5KB, 2KB, 10KB]
LINK LOSS FWD [OFF, ON]
CONFIG ALARMS NO UTP LINK ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE, GPI]
NO FIBER MODULE ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE, GPI]
NO FIBER LINK ALARM LEVEL [GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT [NONE, GPI]
VERSION FXE-1501: XXX
CPU BUILD: XXX
FACTORY DEFAULT [RESTORE]
Note:
* This menu appears only if NEGOTIATION is set to MANUAL
** This menu appears only if NEGOTIATION is set to MANUAL, and if UTP SPEED is not 1000.