Grass Valley K2 Dyno PA v.1.5 - Manual (Page 24)

Starting the K2 Dyno PA application
The K2 Dyno PA application can be started from the desktop icon or from selecting
Start | Programs | Grass Valley . Multiple Dyno PA clients can access one Grass Valley
platform service.
Prerequisites:
• The Grass Valley platform service must be running before you start the K2 Dyno
PA application.
• The first time you start the Grass Valley platform service after installation, you
need to reboot the PC that the service is running on, or manually start the service.
When the Dyno PA application is first started, it runs on a 30-day trial license. To
continue using Dyno PA, you need a permanent license to run Dyno PA. For more
information on licensing, see the K2 Dyno PA Release Notes.
To start the K2 Dyno PA application, follow these steps:
1. Double-click on the Dyno PA icon.
The Dyno PA login displays. This allows you to log in to the PC that runs the
Grass Valley platform service.
2. Enter the following:
a) A username and password. If logging in as an administrator, supply the
administrator username and password as specified in the Managing Users
chapter of the Configuration manual. If logging in as a normal user, enter the
username and password supplied by your administrator.
b) The name or IP address of the PC running the Grass Valley platform service.
If the platform service is running on the same machine, enter localhost .
3. Click the Connect button.
Dyno PA connects with the platform service. The License Selection dialog box
displays. If you have already purchased a permanent license, that license is
displayed. For information on licensing, see the K2 Dyno PA Release Notes.
4. Highlight the license you want to use. To make this the default license, check the
Make Default box. Select the license from the drop-down list.
5. Click Select .
The Dyno PA application displays.
24 Dyno Production Assistant User Manual 15 October 2010
Starting Dyno PA